• Wireless Transmission Speed:108Mbps
• Wireless Technology:IEEE 802.11a/b/g
• Interfaces/Ports:1 x RJ-45 10/100Base-TX Auto-sensing
• Form Factor:Wall-mountable

Features

• Dual 802.11a and 802.11g Radios: Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and backward compatibility with legacy 802.11b clients.
• Supports 15 Nonoverlapping Channels: Lower potential interference with neighboring access points simplifies deployment
• Industry-Leading Radio Design: Provides robust signals to long distances, Mitigates the effects of multipath signal propagation for more consistent coverage
• Variable Transmit Power Settings: Allows access point coverage to be tuned for differing requirements; Low-dBm setting supports closer spacing of access points in high-density deployments
• Integrated Antennas: Complete system is deployable out of the box without external antennas; Specifically designed to provide omnidirectional coverage for offices and similar radio frequency environments
• Hardware-Assisted AES Encryption: Provides high security without performance degradation
• Cisco Unified IDS/IPS: This integrated software feature is part of the Cisco Self-Defending Network and is the industry's first integrated wired and wireless security solution. When a trusted client acts maliciously, the wired IDS detects the attack and sends shun requests to Cisco WLAN controllers, which will then disassociate the client device.
• Management Frame Protection: This feature provides for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
• IEEE 802.11i-Compliant; WPA2-Certified and WPA-Certified: Helps to ensure interoperable security with wireless LAN client devices from other manufacturers
• Low-Profile Design: Unobtrusive design blends in to environment "Quiet" LED does not draw attention to it when operating normally and no action is required
• Multipurpose and Lockable Mounting Bracket: Installs easily to walls, ceilings, and suspended ceiling railways; Accommodates standard padlock to prevent theft
• Inline Power Support (IEEE 802.3af and Cisco Inline Power): Provides an interoperable alternative to AC power Simplifies deployment by allowing power to be supplied over the Ethernet cable Compatible with 802.3af-compliant power sources

Specifications

• Device Type: Wireless Access Point
• Enclosure Type: External
• Memory: 32 MB
• Networking:
  • Connectivity Technology: Wireless
  • Data Transfer Rate: 54 Mbps
  • Line Coding Format: CCK, OFDM
  • Data Link Protocol: IEEE 802.11b, IEEE 802.11a, IEEE 802.11g
  • Remote Management Protocol: SNMP, Telnet, HTTP, HTTPS
  • Status Indicators: Active, error, status
  • Encryption Algorithm: LEAP, AES, 128-bit WEP, 40-bit WEP, TLS, PEAP, TKIP, WPA, WPA2
  • Authentication Method: Secure Shell (SSH), MS-CHAP
  • Compliant Standards: IEEE 802.3, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED
• Interfaces: 1 x network / power - Ethernet 10Base-T/100Base-TX - RJ-45; Network - Radio-Ethernet
• Expansion Slots Total: n/a
• Power: External
• Dimensions: (W X D X H) Unit 7.5 in x 1.3 in x 7.5 in
• Warranty: Service & Support Details 1 year warranty