Highlights for HP ProCurve M110 Wireless Access Point
- Wireless Transmission Speed:54 Mbps
HP ProCurve M110 Access Point is an entry-level, single IEEE 802.11a/b/g radio device that can be configured to operate as an access point, a wireless distribution system (WDS) bridge, or a full-spectrum IEEE 802.11 wireless LAN (WLAN) monitor. The ProCurve M110 Access Point supports up to two Virtual Service Communities, each with independent VLAN and wireless security profiles. It is Plenum rated and powered by IEEE 802.3af-compliant Power over Ethernet (PoE). The M110 access point is Wi-Fi Certified for WPA2, WPA, and WEP security and has hardware assisted AES and RC4 encryption.
Physical CharacteristicsHeight: 1.30"Depth: 5"
Power DescriptionInput Voltage: 5 V DCPower Source: AC AdapterPower Over Ethernet: Yes
Management & ProtocolsManagement: ProCurve Intelligent Mobility system IEEE 802.1p QoS IEEE 802.1Q VLAN HP ProCurve Manager 3.0 HP ProCurve Mobility Manager 3.0 SNMP v2c, v3 DHCP
Technical InformationWireless Security: WPA2 WPA WEP AES RC4 IP filter EAP-SIM EAP-FAST EAP-TLS EAP-TTLS PEAP EAP-MD5 PAP CHAP MS-CHAPv2 TKIP Wireless Transmission Speed: 54 MbpsWi-Fi Standard: IEEE 802.11a/b/gISM Band: YesUNII Band: YesISM Minimum Frequency: 2.41 GHzISM Maximum Frequency: 2.47 GHzUNII Minimum Frequency: 5.18 GHzUNII Maximum Frequency: 5.70 GHzNumber of Antennas: 2Antenna Gain: 2 dBiAntenna Type: Diversity AntennaAntenna Connector: RP-SMA Connector
WarrantyStandard Warranty: Lifetime
Interfaces/PortsFast Ethernet Port: YesNumber of Network (RJ-45) Ports: 1Management Port: Yes
General InformationProduct Type: Wireless Access PointManufacturer Part Number: J9388BManufacturer Website Address: www.hp.comManufacturer: Hewlett-PackardProduct Model: M110Product Name: ProCurve M110 Wireless Access PointProduct Line: ProCurveBrand Name: HP
Physical CharacteristicsWeight (Approximate): 2 lb
HP ProCurve M110 Wireless Access Point
IEEE 802.11a/b/g - 54 Mbps - Power Over Ethernet