Tripp Lite SmartPro 1050 UPS
Item No.
89847
Mfg Part No.
SMART1050
Availability
Not Available

Product Information for Tripp Lite SmartPro 1050 UPS

Highlights for Tripp Lite SmartPro 1050 UPS

  • Load Capacity:1050VA
  • Form Factor:Wall-mountable Tower
  • Product Type:Line-interactive UPS
  • Input Voltage:110V AC

Marketing Information

Tripp Lite's SMART1050 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 23 minutes half load runtime and 8 minutes at full load during power failures. 1050VA / 705 watt power handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations. Includes a total of 6 UPS supported outlets. Supports remote monitoring of UPS and site power conditions via built-in USB monitoring port. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Attractive, small-footprint tower housing uses less than 53 square inches of floor or desktop space. Two year warranty with $250,000 connected equipment insurance.

Miscellaneous

Warranty

  • Standard Warranty
  • : 2 Year(s)

    General Information

  • Manufacturer
  • : Tripp Lite
  • Manufacturer Part Number
  • : SMART1050
  • Product Line
  • : SmartPro
  • Product Name
  • : SmartPro 1050 UPS
  • Product Type
  • : Line-interactive UPS

    Technical Information

  • Plug/Connector Type
  • : NEMA 5-15P
  • Receptacles
  • : 6 x NEMA 5-15R
  • Switching Time
  • : 4 ms

    Power Description

  • Load Capacity
  • : 1050VA / 705W
  • Input Voltage
  • : 110V AC
  • Input Voltage Range
  • : 120V AC Single-phase
  • Output Voltage
  • : 120V AC Single-phase
  • Frequency
  • : 60Hz
  • Waveform Type
  • : Pulse-width Modulated Sine Wave
  • Surge Energy Rating
  • : 480J
  • Filtering
  • : EMI / RFI

    Management

  • Overload Protection
  • : 12A input breaker
  • Audible Alarms
  • : On Battery

    Controls/Indicators

  • Status Indicators
  • : 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information

    Interfaces/Ports

  • Interfaces/Ports
  • : 1USB

    Battery Information

  • Batteries
  • : Sealed Lead-acid User-replaceable Hot-swappable
  • Backup/Run Time
  • : 8 Minute(s) 1050VA Full-load
  • Battery Life
  • : 3 Year(s) to 6 Year(s)
  • Battery Recharge Time
  • : 4 Hour(s)

    Environmental Conditions

  • Temperature
  • : 32 F (0 C) to 104 F (40 C) Operating
  • Humidity
  • : 0 to 95% Non-condensing Relative Humidity

    Physical Characteristics

  • Color
  • : Gray
  • Form Factor
  • : Wall-mountable Tower
  • Power Cord/Cable
  • : 6 ft
  • Dimensions
  • : 11.75" Height x 7.25" Width x 7.5" Depth
  • Shipping Dimensions
  • : 15.5" Height x 11" Width x 11.25" Depth
  • Weight
  • : 29 lb
  • Shipping Weight
  • : 32 lb

    Miscellaneous

    Package Contents

  • SMART1050 UPS System
  • USB monitoring cable
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Instruction manual with warranty information
  • Additional Information

  • 1050VA / 705 watt power handling capability supports a variety of networking, telecom and various other application types
  • Built-in voltage regulation and battery support prevents equipment damage, data loss and downtime
  • Large internal batteries offer 23 minutes half load runtime and 8 minutes at full load during power failures
  • Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an input voltage range of 75-147V
  • Includes a total of 6 NEMA5-15R outlets
  • Includes 1 USB communications port for remote monitoring of UPS status and site power conditions
  • Communications port enables safe unattended shutdown without data loss during extended power failures
  • Communications port supports messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery voltage and battery capacity
  • Communications port supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment
  • PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again
  • Notification of system status via 5 LEDs and multi-function audible alarms
  • Wall mountable with UPSWM wallmount bracket
  • Attractive small footprint beige tower housing uses less than 53 square inches
  • Hot-swappable / user replaceable batteries allow on-site battery replacement
  • Cold start capability enables UPS turn-on in battery mode during blackout conditions
  • UL (USA), cUL (Canada), NOM (Mexico), FCC Class B Listed
  • $250,000 Ultimate Lifetime Insurance
  • 2 year manufacturers product warranty
  • System Requirement

    TYPICAL APPLICATIONS:Ideal for the protection of fileservers, network accessories and telecommunications equipment. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. Ideal for sensitive electronic applications in areas where brownouts and overvoltages are common

    Certifications & Standards

    UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications