Highlights for Tripp Lite SmartPro 5000RT3UXR UPS - Load Capacity:5000VA
- Form Factor:Rack-mountable
- Product Type:Line-interactive UPS
- Input Voltage:220V AC
Marketing Information
Tripp Lite's SMART5000RT3UXR intelligent, line-interactive UPS protects server, networking or telecommunications equipment from blackouts, voltage fluctuations and surges. It is offered in a compact tower / rackmount housing. This special extended runtime bundle includes 3U power module and two 3U external battery packs. In rack configuration, power module and battery packs occupy only 3 rack spaces (3U) each. Large capacity 5000 VA / 4000 watt power module converts raw 208V AC input to fully regulated dual output 208/120 voltage for simultaneous protection of both high and low voltage equipment loads. True sine wave output at all times offers guaranteed compatibility with all equipment types. Includes a total of 14 outlets, 8 of which can be individually reset via software interface to selectively reboot remote equipment or shed less crucial loads to extend battery runtime for more critical equipment. Battery support can be extended indefinitely through the addition of external 3U rackmount battery packs. Includes slot for internal SNMP/web card, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data.
General Information
Manufacturer: Tripp Lite
Manufacturer Part Number: SMART5000RT3UXR
Manufacturer Website Address: www.tripplite.com
Product Type: Line-interactive UPS
Product Line: SmartPro
Product Name: SmartPro 5000RT3UXR UPS
Technical Information
Plug/Connector Type: NEMA L6-30P
Receptacles: 10 x NEMA 5-15R
Battery Information
Batteries: Sealed Lead-acid User-replaceable Hot-swappable
Battery Life: 3 Year(s) to 6 Year(s)
Backup/Run Time: 38 Minute(s) 5000VA Full-load
Battery Recharge Time: 4 Hour(s)
Management
Overload Protection: Resettable circuit breaker (3 total, 15A each)
Alarm: On Battery
Emergency Power OFF: Yes
Network Management: SNMP Manageable Optional
Power Description
Waveform Type: Sine Wave
Filtering: EMI / RFI
Load Capacity: 5000VA/4000W
Input Voltage: 220V AC
Input Voltage Range: 208V AC Single-phase
Output Voltage: 120 to 208V AC
Frequency: 60Hz
Environmental Conditions
Temperature: 32 °F (0 °C) to 95 °F (35 °C) Operating
Humidity: 0 to 95% Non-condensing Relative Humidity
Miscellaneous
Additional Information
Large 5000VA / 4000 watt output capacity with full time sine wave output offers guaranteed compatibility with all equipment types
High power density 5kVA power module and battery pack occupy only 3 rack spaces (3U) each (UPS and battery packs use 9U when installed)
86 minutes half load runtime, expandable runtime with multiple external battery packs (part# BP48V60RT3U)
Line-interactive voltage regulation corrects severe brownouts and overvoltages without using battery power
Dual voltage output is simultaneously compatible with both 208 and 120V equipment
14 total outlets (120V: 10 5-15R, 2 5-20R / 208V: 1 L6-30R, 1 L14-30R)
Diagnostic LEDs provide visual indication of 17 separate performance conditions
Included PowerAlert Software provides e-mail or pager notification of power problems and the simultaneous automatic unattended shutdown of multiple servers
4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown
Slot for SNMP/web card SNMPWEBCARD and environmental sensor ENVIROSENSE for remote communications in large IP environments
8 customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or automatic "load shedding" of less critical loads to extend battery runtime for the most critical equipment
Emergency Power Off (EPO) interface for emergency shutoff in large facilities
Hot-swappable/user replaceable batteries allow on-site battery replacement through the front panel without powering off connected equipment or removing the UPS from the rack
UPS battery set ships fully assembled and ready to connect to the power module; no time-consuming connection of individual internal batteries by user is necessary
2 year manufacturer's product warranty
$250,000 Ultimate Lifetime Insurance (USA & Canada Only). No warranty cards required for coverage!
Package Contents
SMART5000RT3UXR UPS System
2-BP48V60RT3U battery packs
PowerAlert Software and cabling
Mounting hardware
Warranty information with instruction manual
System Requirements
TYPICAL APPLICATIONS:
Ideal for centralized UPS protection of critical 208 and 120 volt equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching system.
Certifications & Standards
UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Physical Characteristics
Power Cord/Cable: 10 ft
Form Factor: Rack-mountable
Shipping Dimensions: 41" Height x 26.5" Width x 32.5" Depth
Shipping Weight: 463 lb
Warranty
Standard Warranty: 2 Year(s)
Interfaces/Ports
Interfaces/Ports: 2 x USB
Modular Slots: 1 x Communications Slot
Controls/Indicators
Status Indicators: 5 front panel LEDs - Green POWER LED, Green VOLTAGE CORRECTION LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LED, red BATTERY WARNING LED
Tripp Lite SmartPro 5000RT3UXR UPS
5000VA 4000W - 38 Minute(s) Full-load - 10 x NEMA 5-15R, 2 x NEMA 5-20R, 1 x NEMA L6-30R, 1 x NEMA L14-30R
$3,881.60
Computers
All Computers
