Omnitron FlexPoint Media Converter
Media Converter - 1 x RJ-45 , 1 x SC - 100Base-TX, 100Base-FX
Back To Top
Free Ground Shipping
- Item No.
- Mfg Part No.
Product Information for Omnitron FlexPoint Media Converter
Highlights for Omnitron FlexPoint Media Converter
Marketing InformationConnects switches, hubs and workstations via fiber.Supports EIA/TIA 568 RJ45 category 5 wiring and features a crossover switch for convenient uplinks.Software-independent.
General InformationManufacturer: Omnitron Systems TechnologyManufacturer Part Number: 4330-1Manufacturer Website Address: www.omnitron-systems.comProduct Line: FlexPointProduct Name: FlexPoint Media ConverterProduct Type: Media ConverterBrand Name: Omnitron
Media & PerformanceConnectivity: UTPConnectivity Media: 100Base-FX 1310 nm Multi-mode FiberDistance Support: 1.2Mile
Management & ProtocolsProtocols: Fast Ethernet
Power DescriptionInput Voltage: 110 V AC Frequency: 60 Hz
Environmental ConditionsTemperature: 32 °F (0 °C) to 158 °F (70 °C) OperatingHumidity: 0 to 90% Non-condensing Operating
Physical CharacteristicsColor: White Form Factor: Rack-mountableDimensions: 1" Height x 1" Width x 4" DepthShipping Dimensions: 3" Height x 4.25" Width x 7" DepthWeight: 0.37lbShipping Weight: 1.46 lb
Additional Information Auto-negotiates half-duplex (HD) or full-duplex (FD) operation to maximize data transfer speed and distance between connected devices.The FlexPoint 100Fx/Tx auto-adapts to the highest level of performance supported by the device connected to the UTP port. When the device is a switch or a workstation that supports full duplex, the FlexPoint 100Fx/Tx adapts to the full-duplex mode and provides an effective 200 Mbps bandwidth. When the connected device is a hub or a workstation that only supports half duplex, the FlexPoint 100Fx/Tx adapts to the half-duplex mode and provides the nominal 100 Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation.
Switches: UTP Crossover: Straight/ Crossed UTP Auto-Negotiation: Auto-Negotiation/ Manual Duplex Mode: Full-Duplex/ Half-Duplex
Package Contents Power Adapter Kit: 110 Volt / 60 Hz
Certifications & Standards IEEE 802.3-LANIEEE 802.3U-LAN
WarrantyStandard Warranty: Lifetime LimitedParts Warranty/Labor: Lifetime
Interfaces/PortsInterfaces/Ports: 1 x SC Number of Ports: 2
Controls/IndicatorsStatus Indicators: Power: LED, Yellow, power applied Auto-Negotiation: LED, Green, Auto-Negotiation enabled Full-Duplex: LED, Green, Full-Duplex selected Half-Duplex: LED, Green, Half-Duplex selected Fiber Link/ Receive: LED, Green, Link/ data received Fiber Error: LED, Red, data errors detected on fiber UTP Link/ Receive: LED, Green, Link/ data received UTP Error: LED, Red, data errors detected on UTP
Network & CommunicationNetwork Technology: 100Base-TX