- Item No.
- Mfg Part No.
TOP SELLING TESTING EQUIPMENT
Product Information for Fluke Networks EtherScope Series II Network Assistant LAN-SX Fiber
Highlights for Fluke Networks EtherScope Series II Network Assistant LAN-SX Fiber
- Product Type:Network Testing Device
Marketing InformationES2-LAN plus SX Fiber Option.
EtherScope Network Assistant provides critical performance metrics about your wired and wireless LANs. The instruments autotest feature quickly verifies performance at the physical layer, discovers networks and devices, and identifies configuration and performance problems. For in-depth analysis, the instrument also includes a group of diagnostic tools to enable you to locate devices on your network and verify inter-connectivity.
The instruments user interface, which is presented on a color, touch-sensitive screen, is straightforward and intuitive. Simply by tapping a screen button, a navigation icon, or other on-screen element, you can drill down and obtain more detailed information or perform a specific operation.
Supports monitoring and testing of 10/100/1000 IEEE 802.3 (10BaseT, 100BaseTX, and 1000BaseT) networks through an RJ-45 interface, and the optional SFP fiber interface that supports 1000BaseSX, 1000BaseLX, and 1000BaseZX fiber. Discovers devices, networks, and VLANs, enabling you to view individual configurations, obtain health and status information, and view network activity, errors, and protocols used.
Fiber option enables the SFP fiber interface. Supports 1000BaseSX, 1000BaseLX, or 1000BaseZX fiber.
Package ContentsIncludes mainframe with LAN option, SX SFP with Fiber option, rechargeable Li-Ion battery pack (installed), protective holster, carrying strap, instrument case, AC adapter/battery charger, wire map remote (ID #1), RJ-45 coupler, patch cable, 64MB CompactFlash® card and CD containing user manual and other useful files.
Additional InformationCommunication and accessory ports 1 USB, 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle Network analysis ports RJ-45 10/100/1000BASE-T Ethernet (must be enabled)EMCComplies with EN61326, Class A, Criteria C Cable typesUnshielded twisted pair LAN cables (100 and 120 Ohm UTP)Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP)Cable length1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selectedLength resolutionÂ± [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection greater than 20%Receive level100 to 5000 mVp-p Datalink signal500 to 4000 mVp-p Power over Ethernet (PoE)Solicit for IEEE 802.3af PoE, measure DC voltage (mV) on each pin, remove solicitationMeasuring terminated cablesThe Cable Verification feature tests the individual twisted-pairs of a cable that are terminated into most equipment vendor's Ethernet ports such as on a hub, switch or NIC. All cable tests other than WireView wire map and office locator ID are operational in the presence of datalink signal. Wiremapper/office locator compatibilityDetects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wire map adapter/office locator. Fault toleranceThe RJ-45 Ethernet connection on the analyzer is designed to withstand a maximum of 100 volts. The RJ-45 connection is not for connection of public telephone systems and should only be connected to the public phone network through regulatory agency compliant modem devices. Fiber optic power meterOptical power meter compatibility The analyzer supports the Fluke Networks DSP-FOM optical power meter. Connection to the DSP-FOM is through the RF-45 Ethernet connection.SecurityAuthentication types LAN: 802.1XEAP types TLS, GTC, MD5, MS-CHAP-V , LEAP, PEAP-GTC, PEAP-MD5, PEAP-MS-CHAP-V , PEAP-TLS, TTLS-PAP, TTLS-CHAP, TTLS-MS-CHAP, TTLS-MS-CHAP-V , TTLS-EAP-MD5, TTLS-EAP-GTC, TTLS-EAP-MS-CHAP-V , TTLS- EAP-TLS
Management & Protocols
Media & Performance
Display & Graphics