Highlights for Huawei Device 24 10/100 Base-T Ports and 2 Combo GE(10/100/1000 Base-T+100/1000 Base-X) Ports

The S2700 series enterprise switches (S2700 for short) are next-generation energy-saving intelligent 100M Ethernet switches. The S2700 utilizes cutting-edge switching technologies and Huawei Versatile Routing Platform (VRP) software to meet the demand for multi-service provisioning and access on Ethernet networks. It is easy to install and maintain and can be used in a variety of enterprise network scenarios. With its flexible VLAN deployment, comprehensive security and QoS policies, and energy-saving technologies, the S2700 helps enterprise customers build next-generation IT networks.

• Auto Configure
• HGMP group management
• Embedded 6 KV surge protection
• 802.1x and MAC address authentication
• PoE+

S2700 series are fixed switches with standard (SI) and enhanced (EI) versions¡£Comparing to the standard version, the enhanced version additionally supports features such as QinQ£¬ACL£¬802.1X and so on.

Specifications

• 100M port: 24*10/100Base-TX
• 1000M port: 2*GE Combo
• MAC address table
  • 8K MAC address entries
  • Manual creation and deletion of MAC address entries
  • Aging time of MAC address entries
  • Disabling MAC address learning on an interface or aggregation group
  • Limit on the number of MAC addresses learned on an interface
  • Blackhole MAC address entries
• VLAN
  • 4K VLANs, complying with IEEE 802.1Q
  • Port-based VLAN assignment
  • MAC address-based VLAN assignment
  • Port-based QinQ assignment
• QoS
  • Port-based rate limiting and flow-based rate limiting
  • Four or eight queues of different priorities on each port
  • Mapping between 802.1p priorities and queues
  • SP, WRR, and SP+WRR algorithms
  • Traffic classification based on the source MAC address, destination MAC address, source IP address, destination IP address, Layer 4 port number, protocol type, VLAN ID, Ethernet protocol, and CoS
  • Flow-based priority marking and packet redirection
• IPv6 features
  • IPv6 host
  • Static IPv6 routes
  • IPv6 ACLs
  • MLD v1/v2 snooping
• Multicast
  • IGMP v1/v2/v3 snooping
  • Multicast load balancing among member ports of a trunk
  • Port-based rate limiting and traffic statistics for multicast packets
• Port mirroring
  • 1:1 and N:1 port mirroring
  • Traffic mirroring
• Security
  • 802.1x authentication and limit on the number of users on an interface
  • Dynamic ARP detection
  • IP source guard
  • AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
  • Binding of the IP address, MAC address, interface, and VLAN
  • Port-based rate limiting
  • Port isolation, port security, and sticky MAC
  • Packet filtering
  • Packet filtering based on MAC addresses
  • Suppression of multicast, broadcast, and unknown unicast packets
  • Limit on the number of learned MAC addresses
  • CPU defense
• Surge protection: 6KV surge protection capability on service ports (1KV on service ports on PoE devices)
• Device management
  • Stacking
  • Auto-Config
  • CLI-based configuration
  • Remote configuration using Telnet
  • SNMP V1/V2/V3
  • RMON
  • HGMP v2
  • SSHv2
  • Web-based device management
  • GVRP
• Operating environment
  • Operating temperature: 0¨C50¡æ(long term); -5¡æ¨C55¡æ(short term)
  • Relative humidity: 10%¨C90% (non-condensing)
• Power supply
  • AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
  • DC:
    • Rated voltage range: ¨C48 V to ¨C60 V DC
    • Maximum voltage range: ¨C36 V to ¨C72 V DC
    • Note: PoE-support switches do not use DC power supplies.
• Dimensions (W x D x H): 442 mm x 420 mm x 43.6 mm
• Weight: < 4 kg
• Power consumption: < 808W (PoE: 740 W)

---

---

There are no recommended products for this item.