Chief RPA-193 Inverted Custom Projector Mount
Steel - 50 lb
Back To Top
- Item No.
- Mfg Part No.
- Not Available
Product Information for Chief RPA-193 Inverted Custom Projector Mount
Highlights for Chief RPA-193 Inverted Custom Projector Mount
- Product Type:Ceiling-mountable
- Load Capacity:50 lb
RPA-193 is the top-selling projector mount in the industry. This RPA mount is installed in offices, schools and homes than any other mount. Also recognized in the Media & Methods 2003 Awards Portfolio for making a significant contribution to the school market.
: Chief ManufacturingManufacturer Part Number
: RPA-193Manufacturer Website Address
: www.chiefmfg.comProduct Series
: RPAProduct Model
: RPA-193Product Name
: RPA-193 Inverted Custom Projector MountProduct Type
Product InformationLoad Capacity
: 50 lb Maximum
: Black Material
: 1.75" Height x 6.25" Width x 5.5" Depth
RPA-193 Inverted Custom Projector Mount Includes:Allen WrenchSecurity Allen Wrench1 x BRACKET, Ceiling 1 x BRACKET, Joint 1 x PLATE, Adjustment12 x SCREW, Self-Tapping, Pan Head, 10-24 X 1/2", with washer1 x SCREW, Set, 5/16"
Column: 1.5" NPTLow-profile, aesthetic designQuick projector disconnect/reconnectEasy installation - no assemblyDisconnect without affecting adjustmentsConvenient lamp and filter accessAll-Points Security System included at no additional costThree ceiling mounting methodsFlush mount without disassemblyAllows cables to be routed through the top of the mount without additional accessoriesCompatible with a large assortment of accessories to easily overcome a variety of installation challengesCompatible with the PG-1 Projector Guard Security CageAllows natural convection ventilationRoll Adjustment: +/- 4º adjustment up or down. Loosen screw, adjust mount and tighten screw to hold adjustmentPitch Adjustment: +/- 25º adjustment on each side of the mount. Loosen screw, adjust mount and tighten screw to hold adjustment. Full range of pitch in a flush mount installationYaw Adjustment: 360º by turning the mount on the threaded column and securing in place with set screw. 12º yaw possible on flush mount using slots in top of RPA
Certifications & Standards