APC Switched Rack 7.36kVA PDU
16 x IEC 320-C13 - 7.36kVA - 2U Rack-mountable
Back To Top
Free Ground Shipping
- Item No.
- Mfg Part No.
Product Information for APC Switched Rack 7.36kVA PDU
Highlights for APC Switched Rack 7.36kVA PDU
Switched Rack 7.36kVA PDU is a power distribution that remotely controls power to individual outlets and monitors the aggregate power consumption with single input power source. The Switched Rack PDU provides an aggregate current draw, which can be viewed remotely or locally, via digital display, power on and off delays. Alarms will be generated based on user-defined thresholds to alert users of potential circuit overloads.
General InformationManufacturer: American Power Conversion CorpManufacturer Part Number: AP7922Product Name: Switched Rack 7.36kVA PDUManufacturer Website Address: www.apc.comProduct Type: PDUBrand Name: APC
Technical InformationInput Receptacles: 1 x IEC 309Output Receptacles: 16 x IEC 320-C13 SwitchedProtection Type: Overload Protection
Power DescriptionInput Voltage: 230 V AC 10% Output Voltage: 230 V AC Frequency: 50 Hz Current: 32A Input Current Circuit Breaker: 2 x 16A - Power Rating: 7.36kVAFiltering: Radio Frequency Interference (RFI)
Environmental ConditionsTemperature: 0 °C (32 °F) to 45 °C (113 °F) OperatingHumidity: 0 to 95% Relative Humidity OperatingAltitude: 0 ft to 10000 ft Operating
Additional Information Overload protection: 16 A
Package Contents Switched Rack 7.36kVA PDUDocumentation CD Installation GuideRack Mounting Brackets
Certifications & Standards AS/NZS 3548 (C-Tick) Class A CE EN 55022 Class A EN 55024 EN 60950 EN 61000-3-2 VDE
Physical CharacteristicsColor: BlackPower Cord/Cable: 10ft Power CordForm Factor: 2U Rack-mountableDimensions: 3.5" Height x 17.5" Width x 4.5" DepthShipping Dimensions: 5.5" Height x 20" Width x 14.5" DepthWeight: 9.9 lb Shipping Weight: 14.4 lb
WarrantyParts Warranty/Labor: 2 Year Standard Warranty: 2 Year
Interfaces/PortsInterfaces/Ports: RJ-11 Modular Port
Controls/IndicatorsStatus Indicators: Line Indicator LEDStatus LEDLink LEDOverload
ManagementManagement: Switched Rack PDU can be monitored through Web, Telnet, SNMP, or InfraStruXure Manager interfaces
- Web interface: As your browser, you can use Microsoft Internet Explorer 5.0 (and higher) or Netscape 4.0.8 (and higher, except Netscape 6.x) to access the Management Card through its Web interface
- SNMP: Add the PowerNet MIB to a standard SNMP MIB browser, you can use that browser for SNMP access to the Rack PDU
- Telnet: From any computer on the same subnet as the Rack PDU, you can use ARP and Ping to assign an IP address to the Rack PDU, and then use Telnet to access that Rack PDU s control console and configure the needed TCP/IP settings