• Product Type:Device Tester

The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in Monitor mode, thus ensuring the integrity of critical data lines. Features such as Tone (DTMF) or Pulse operation, Talk/Monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.

Specifications

Electrical

• Loop Limit: 2.4 kΩ maximum at 48 VDC (nominal 15 mA minimum loopcurrent)
• DC Resistance (Talk Mode): 150 Ω typical at 80 mA current
• AC Impedance (Monitor Mode)
  • Low impedance (Ring position): 600 Ω at 1 KHz typical
  • High impedance (HI Z position): 100 kΩ minimum at 1 KHz
  • Rotary Dial Output: 10 pps .5 pps
  • Pulsing Rate: 60 % ± 2 %
  • Percent Break: 800 ms typical
  • Interdigit Interval Leakage During Break: > 50 kΩ
  • DTMF Output: ±1 % maximum
  • Tone Frequency Error: Level per Tone Pair dBm maximum, - dBm minimum
  • High versus Low Tone Difference: 4 dB maximum

• Length: 8.75 in (22.2 cm)
• Width: 2.375 in (6.03 cm)
• Height: 3.375 in (8.57 cm)
• Weight: 10.8 oz (.307 kg) maximum

• Temperature
  • Operating: -5 °C to °C
  • Storage: -40 °C to °C
• Drop: 1 meter, 4 times
• Altitude: To 3,000 meters (10,000 feet) maximum
• Relative Humidity: 10 %to 80 % (non-condensing)
• Regulatory Standards Used
  • 47 CFR Part 15, Subpart B
  • ICES-003 Issue 3
  • AS/NZS 3548
  • EMC Directive 89/336/EEC, EN 55022:98, EN 61326:97, A1:98 Annex C, EN 61000-4-2, EN 61000-4-3
  • LV Directive 73/23/EEC, EN 610010.1 (1993)
• Certifications and Compliance
  • Conformité Européenne. Conforms to relevant European Union directives.
  • CAN/CSA-C22.2 No. 60950-1-03
  • CAN/CSA-C22.2 No. 1010.1-92 CSA-C22.2 No. 1010.1B-97, UL/ANSI 3111-1

---

Fluke TS19 Device Tester