Highlights for Bogen MIC1X Microphone Input Module
The MIC1X module shall have a transformer-isolated, balanced input with XLR connector. It shall interface with low-impedance dynamic microphones. It shall also interface with electret condenser microphones and shall have an internal 24V DC phantom power supply to provide the bias supply that is enabled by a PCB jumper. The module shall have a gain control that will allow the gain to be adjusted from 28 dB to 62 dB. It shall have the ability to mute lower priority modules and be muted by higher priority modules. The module shall be able to assume any of 4 priority levels. The module shall have a VOX/gating circuit to control muting of lower priority modules and its internal gating circuit with controls for threshold and duration. It shall have a built-in limiter, with a threshold control, to limit the maximum output level of the module. A front panel LED will indicate limiter activity.
General InformationProduct Type: Microphone Input ModuleManufacturer Part Number: MIC1XManufacturer Website Address: www.bogen.comManufacturer: Bogen Communications International, IncProduct Model: MIC1XProduct Name: MIC1X Microphone Input ModuleBrand Name: Bogen
Additional Information Frequency Response: +0/-3 dB, 10 Hz-20 kHz Priority: Four levels Phantom Power: 24V DC (defeatable) Connector: XLR
Physical CharacteristicsDimensions: 3.13" Height x 1.38" Width x 3.50" DepthWeight: 3.60 oz
Bogen MIC1X Microphone Input Module