C2G EIDE Data Cable
Item No.
Mfg Part No.
Not Available

Product Information for C2G EIDE Data Cable

Highlights for C2G EIDE Data Cable

  • Connector Type on First End:IDS
  • Connector Type on Second End:IDS
  • Cable Length:18"

Marketing Information

Get the performance you expect from your new UDMA IDE drives, plus minimal clutter, a clean looking cables and increased air flow by using Molded Round Ultra ATA133 Cables from Cables To Go. The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. And these cables reduce over-heating and saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used.

General Information

  • Manufacturer: Cables To Go
  • Manufacturer Part Number: 26961
  • Product Name: EIDE Data Cable
  • Manufacturer Website Address: www.cablestogo.com
  • Product Type: Device Cable
  • Brand Name: Cables To Go
  • Technical Information

  • Cable Length: 18"
  • Connector on First End: 1 x 40-pin IDS Female
  • Connector on Second End: 2 x 40-pin IDS Female
  • Cable Type: IDE/EIDE
  • Physical Characteristics

  • Color: Gray
  • Shipping Dimensions: 0.2" Height x 3" Width x 18" Depth
  • Weight: 0.13 lb
  • Shipping Weight: 0.16 lb
  • Miscellaneous

    Additional Information

  • Connectors: 80-wire/40-pin IDS Female to Two 80-wire/40-pin IDS Females
  • Devices Supported: 2
  • Cable Type: Type-B
  • Connector Spacing: 0-12-18in
  • Supports Ultra66/100/133 drives

    Connector Layout:
  • Blue connector: System
  • Gray connector: Slave connector
  • Black connector: Master
  • Compatibility

  • Hard Drive Ultra 133/100 and Ultra 66. Backwards compatible with Ultra33, IDE/ATAPI.
  • CD-ROM
  • CD-R
  • CD-RW
  • Tape Drive
  • Zip Drive
  • LS-120s and other IDE/ATAPI devices
  • Warranty

  • Standard Warranty: Lifetime