Siig Serial ATA 4-Channel RAID
$ 44.27 $ 59.99 Not Available
Condition:
New
Item No.
482127
Mfg Part No.
SC-SA4R12-S2

Product Information for Siig Serial ATA 4-Channel RAID

Highlights for Siig Serial ATA 4-Channel RAID

  • Product Type:Serial ATA Controller
  • Host Interface:PCI
  • Drive Supported:Up to 4 x Serial ATA/150

Marketing Information

  • Easily add Serial ATA RAID (0, 1, 0+1) speed and security
  • Supports RAID 0 (stripping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability
  • Thin, flexible Serial ATA cables make it easier to route inside a PC
  • Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives

Interfaces/Ports

  • Ports: 4 x 7-pin Serial ATA Serial ATA/150 Serial ATA (7-pin) Internal
  • Environmental Conditions

    General Information

  • Product Type: Serial ATA Controller
  • Manufacturer Part Number: SC-SA4R12-S2
  • Manufacturer Website Address: http://www.siig.com
  • Packaged Quantity: 1
  • Manufacturer: SIIG, Inc
  • Product Name: Serial ATA 4-Channel RAID
  • Package Type: Retail
  • Brand Name: SIIG
  • Packing: Box
  • Miscellaneous

    Additional Information

    • Regulatory approval(s): FCC Class B (DoC) & CE
    • Port type: Four Serial ATA ports
    • Slot type: 32-bit PCI
    • Compliant with Serial ATA Specification, revision 1.0
    • Compliant with PCI Specification, revision 2.2
    • Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 0+1 (striping & mirroring)
    • Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA hard disks
    • Features independent 256-byte FIFOs per channel for host reads and writes
    • Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
    • Supports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5Gb/s)
    • Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
    • Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included. Two "Y" split power cable is also included to provide extra power connection!

    Package Contents

    • Serial ATA 4-channel RAID
    • Four Serial ATA cables
    • Two Dual-connector SATA power cables
    • Two "Y" split power cables
    • Driver and utility software
    • User' manual

    Certifications & Standards

    FCC Class B, CE, RoHS

    System Requirements

    • Pentium or equivalent PC with one available PCI slot
    • Windows 98SE/ME/NT4.0/2000/XP/Vista (32-bit & 64-bit)

    Green Compliant

    Yes

    Green Compliance Certificate/Authority

    RoHS

    Physical Characteristics

  • Form Factor: Low-profile Plug-in Card
  • Power Description

    Reliability

    Software

    Technical Information

  • Host Interface: PCI
  • Data Transfer Rate: Up to 1.17 Gbit/s
  • Drive Supported: Up to 4 x Serial ATA/150
  • Platform Supported: PC
  • Drive Type: Serial ATA/150
  • Warranty

  • Limited Warranty: Lifetime