Siig Serial ATA PCI RAID
$ 52.44 $ 59.90 Not Available Free Ground Shipping
Condition:
New
Item No.
142735
Mfg Part No.
SC-SATR12-S4

Product Information for Siig Serial ATA PCI RAID

Highlights for Siig Serial ATA PCI RAID

  • Product Type:SATA Controller
  • Host Interface:PCI

Marketing Information

SIIG's Serial ATA PCI RAID controller card is designed to co-exist with on-board controllers to add two internal ultra high speed SATA channels for connecting up to two SATA hard disk drives. The Serial ATA PCI RAID controller delivers data transfer rates of up to 1.5Gb/s, and supports RAID 0 (striping) for performance and RAID 1 (mirror) for data reliability. It features two independent 256-byte FIFOs channels for host reads and writes, watch dog timer for fault resiliency and flash memory for future BIOS updates.

The 2-channel Serial ATA PCI RAID controller card is powered by Silicon Image chip and is fully compliant with Serial ATA Specification, Revision 1.0, PCI Specification, Revision 2.2 and is FCC Class B (DoC) & CE regulatory approved and RoHS-compliant. It is also fully compatible with a wide variety of Windows operating systems and is backed by SIIG's limited lifetime warranty.

Interfaces/Ports

General Information

  • Product Type: SATA Controller
  • Manufacturer Part Number: SC-SATR12-S4
  • Manufacturer Website Address: http://www.siig.com
  • Packaged Quantity: 1
  • Manufacturer: SIIG, Inc
  • Product Name: Serial ATA PCI RAID
  • Package Type: Retail
  • Brand Name: SIIG
  • Packing: Box
  • Memory

    Miscellaneous

    Additional Information

    • Regulatory approval(s): FCC Class B (DoC) & CE
    • Port type: Two Serial ATA ports
    • Slot type: 32-bit PCI
    • Compliant with Serial ATA Specification, revision 1.0
    • Compliant with PCI Specification, revision 2.2
    • Supports RAID 0 (stripping) for performance and RAID 1 (mirroring) for reliability
    • Coexists with Ultra ATA controller and allows you to connect up to two Serial ATA hard disks
    • Features independent 256-byte FIFOs per channel for host reads and writes
    • Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
    • Supports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5Gb/s)
    • Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
    • Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard disks
    • Two high quality SATA cables and 15-pin SATA power cables required for RAID configuration are included. One "Y" split power cable is also included to provide extra power connection!

    Package Contents

    • Serial ATA PCI RAID
    • 2 x Serial ATA cables
    • 2 x SATA 15-pin power cables
    • "Y" split power cable
    • User's manual

    Compatibility

    Supported Operating System:

    • Windows 98SE
    • Windows NT4.0
    • Windows ME
    • Windows 2000
    • Windows XP
    • Vista (32-bit & 64-bit)

    Platform Supported

    PC

    Green Compliant

    Yes

    Green Compliance Certificate/Authority

    RoHS

    Physical Characteristics

  • Form Factor: Plug-in Card
  • Technical Information

  • Host Interface: PCI
  • RAID Levels: 1
  • RAID Supported: Yes
  • Number of Physical Drive Supported: 2
  • Warranty

  • Limited Warranty: Lifetime
  • Additional Product Specifications

    Interfaces/Ports

  • Total Number of SATA Ports: 2