Wilson Electronics In-Line Signal Booster
Item No.
857698
Mfg Part No.
806215
Availability
Not Available

Product Information for Wilson Electronics In-Line Signal Booster

Highlights for Wilson Electronics In-Line Signal Booster

Marketing Information

The In-Line Signal Booster is designed to be be used by professional installers in larger buildings to provide an additional 17dB gain to compensate for signal loss due to a long cable run or use of taps or splitters to accommodate multiple antennas. The Inline Booster is installed between a Wilson indoor signal booster unit, like the AG Pro Installer, and that booster's inside antenna. Optimally the In-line Booster is installed after long runs of cable and/or taps and splitters to compensate for signal loss. The Inline Booster can be installed in the middle of a cable run or near the inside antenna, as needed.

Interfaces/Ports

  • Interfaces/Ports: Type N Female Antenna
  • General Information

  • Product Type: Cellular Phone Signal Booster
  • Manufacturer Part Number: 806215
  • Manufacturer Website Address: www.wilsonelectronics.com
  • Manufacturer: Wilson Electronics, Inc
  • Product Name: In-Line Signal Booster
  • Brand Name: Wilson
  • Miscellaneous

    Certifications & Standards

    FCC

    Physical Characteristics

  • Weight (Approximate): 1.27 lb
  • Height: 5.7"
  • Width: 4.2"
  • Depth: 1.5"
  • Power Description

  • Input Voltage: 110 V AC
  • Technical Information

  • Impedance: 50 Ohm
  • Transmit Power: 1 mW
  • Network Supported: GSM
  • Frequency Range: 824 MHz to 894 MHz
  • Maximum Gain: 19 dB
  • Warranty