Adtran TSU T1/Fractional T1 CSU/DSU
$ 872.07 $ 1245.00 Not Available
Condition:
New
Item No.
522198
Mfg Part No.
1200060L2

Product Information for Adtran TSU T1/Fractional T1 CSU/DSU

Highlights for Adtran TSU T1/Fractional T1 CSU/DSU

  • Product Type:T1 CSU/DSU

Marketing Information

The ADTRAN TSU is a low cost, full-featured T1/FT1 Data Service/ Channel Service Unit (DSU/CSU). The TSU provides an interface between T1 or Fractional T1 service and the end user's Data Terminal Equipment (DTE) for applications such as LAN to LAN bridging, Frame Relay circuit termination and videoconferencing. The TSU provides access to traditional dedicated point-to-point T1 services as well as network termination for Frame Relay.

Controls/Indicators

Interfaces/Ports

  • Electrical Interface: CCITT V.35
  • Ports: 1 x 34-pin Serial V.35 Mechanical
  • Environmental Conditions

  • Humidity: Up to 95% Non-condensing
  • Temperature: 32F (0C) to 122F (50C) Operating
  • General Information

  • Product Type: T1 CSU/DSU
  • Manufacturer Part Number: 1200060L2
  • Manufacturer Website Address: www.adtran.com
  • Manufacturer: Adtran
  • Product Name: TSU T1/Fractional T1 CSU/DSU
  • Brand Name: Adtran
  • I/O Expansions

    Media & Performance

  • Data Transfer Rate: 56 Kbps to 1.54 Mbps DTE
  • Miscellaneous

    Additional Information

  • Auto and manual D4(SF) or ESF framing support
  • Easy to use front panel keypad for unit configuration and monitoring
  • Remote TSU configuration via FDL or 8k in-band
  • Local and remote loopback capability
  • Extensive built in test capabilities
  • Support for T-Watch PRO software for optional PC based configuration
  • Single V.35 DTE interface for applications such as LAN-to-LAN bridging, Frame Relay circuit termination, and dedicated videoconferencing
  • Synchronous DTE rates in increments of 56 Kbps or 64 Kbps up to 1.536 Mbps
  • Bantam test jacks
  • Supports VT100 terminal configuration and remote - configuration using the control port
  • Metal chassis
  • Framing:
    - SF/ESF
    - Auto detection
  • ESF Format:
    - AT&T 54016
    - ANSI T1.403
  • DSO Assignment:
    - Contiguous
    - Alternating
  • T1 Transmit Timing:
    - Loop timed
    - Internal
    - DTE
  • DTE Transmit Clock: Automatic
  • Performance Monitor Performance Data: BPVs/CRCs, ES, SES, UAS, % AS, % EFSEC, alarms, errors
  • Reports: NI information stored for last 24 hours in 15 minute increments
  • PRMS: ANSI performance report messages (user selectable)
  • Built-In Test Patterns:
    - 511 (active DS0s) with error insert available
    - 1:8 (all DS0s)
    - All 1's (all DS0s)
    - All 0's (all DS0s)
    - QRSS (active DS0s) w/ error insert available
  • Certifications & Standards

  • FCC part 15
  • Class A
  • FCC Part 68
  • Industry
  • Canada CS03, UL, CUL
  • Physical Characteristics

  • Dimensions: 1.50" Height x 9" Width x 6.25" Depth
  • Shipping Dimensions: 4" Height x 10" Width x 15.50" Depth
  • Shipping Weight: 6.44 lb
  • Weight: 2 lb
  • Power Description

  • Input Voltage: 115 V AC
  • Frequency: 60 Hz
  • Power Consumption: 5 W
  • Management & Protocols

    Technical Information

  • Data Encoding: AMI/B8ZS
  • Diagnostic Features:
  • Local: Payload/line loopback, DTE loopback
  • Remote: Payload/line loopback, V.54 (DTE) loopback
  • Network: CSU and DSU loopbacks
  • Warranty

  • Standard Warranty: 5 Year