Adtran T1 ESF ACE CSU
1 x RJ-48C 1 x DB-9 RS-232 1 x RJ-48C DTE - 1.54Mbps
Back To Top
Free Ground Shipping
- Item No.
- Mfg Part No.
Product Information for Adtran T1 ESF ACE CSU
Highlights for Adtran T1 ESF ACE CSU
- Product Type:T1 CSU
- Form Factor:Desktop
The ADTRAN T1 ESF CSU is a full-featured T1 Channel Service Unit used to connect T1 data terminal equipment (DTE) such as a PBX, switch or channel bank to T1 facilities. Capable of interfacing to both B8ZS or AMI circuits, the T1 ESF CSU can convert signal formats or line code to integrate older equipment. The ESF CSU is designed to provide alarms, loopbacks, signal regeneration, line build-out, and surge protection, while maintaining 1's density for the DTE and T1 network.
Controls/IndicatorsStatus Indicators: Front Panel LCD Power Alarms Errors Loopback
Interfaces/PortsPorts: 1 x 8-pin RJ-48C Network
Environmental ConditionsHumidity: Up to 95% Non-condensing Relative HumidityTemperature: 32°F (0°C) to 122°F (50°C) Operating
General InformationProduct Type: T1 CSUManufacturer Part Number: 1204025L1Manufacturer Website Address: www.adtran.comManufacturer: AdtranProduct Name: T1 ESF ACE CSUBrand Name: Adtran
Media & PerformanceData Transfer Rate: 1.54 Mbps T1
Additional Information Framing: SF/ESF Equipment line build-out configuration 0-655 feet
Bantam Jacks: Test Signal access to Network & DTE Non-interrupt signal receive: Network & DTE
Package Contents T1 ESF CSU ACE T1 Loopback Test Adapter RJ45 Cable AC wallmount power supply Manual
Certifications & Standards FCC part 15 Class A Part 68 Industry Canada CS03 UL 1459 CUL
Compliance: ANSI T1.403 AT&T 62411
Physical CharacteristicsDimensions: 2" Height x 9.30" Width x 6.50" DepthWeight: 1 lbForm Factor: Desktop
Power DescriptionInput Voltage: 12 V DC to 48 V DCPower Consumption: 2.50 W
Management & ProtocolsManagement: SNMP VT100 interface
Technical InformationData Encoding: AMI/B8ZSDiagnostic Features:
Performance Data: BPVs/CRCs, ES, SES, UAS, %AS, %EF SEC Alarms, Error Rates
Reports: NI information stored 24 hrs, every 15 min.
PRMS: ANSI Performance Report Messages (User Selectable)
Test Local: Payload/Line (NI), DTE (T1)
Test Remote: Payload/Line (NI)
Test Patterns: 1:8, All 0's, All 1's
WarrantyStandard Warranty: 5 Year