Adtran TSU LT T1/Fractional T1 CSU/DSU
$ 619.88 $ 895.00 Not Available Free Ground Shipping
Condition:
New
Item No.
481849
Mfg Part No.
1203060L1

Product Information for Adtran TSU LT T1/Fractional T1 CSU/DSU

Highlights for Adtran TSU LT T1/Fractional T1 CSU/DSU

  • Product Type:T1 CSU/DSU
  • Form Factor:Rack-mountable

Marketing Information

The ADTRAN TSU LT is a low cost, full-featured T1/FT1 Data Service/ Channel Service Unit (DSU/CSU). The TSU LT provides an interface between T1 or Fractional T1 service and the end user's Data Terminal Equipment (DTE) for applications such as LAN to LAN bridging, Frame Relay circuit termination and videoconferencing. The TSU LT provides access to traditional dedicated point-to-point T1 services as well as network termination for Frame Relay.

Controls/Indicators

Interfaces/Ports

  • Electrical Interface: CCITT V.35
  • Ports: 1 x 8-pin RJ-48C Network Physical
  • Environmental Conditions

  • Humidity: Up to 95% Non-condensing Relative Humidity
  • Temperature: 32F (0C) to 122F (50C) Operating
  • General Information

  • Product Type: T1 CSU/DSU
  • Manufacturer Part Number: 1203060L1
  • Manufacturer Website Address: www.adtran.com
  • Manufacturer: Adtran
  • Product Name: TSU LT T1/Fractional T1 CSU/DSU
  • Brand Name: Adtran
  • I/O Expansions

    Media & Performance

  • Data Transfer Rate: 56 Kbps to 1.54 Mbps DTE
  • Miscellaneous

    Additional Information

  • Single V.35 DTE interface for applications such as LAN-to-LAN bridging, Frame Relay circuit termination, and dedicated videoconferencing
  • User-programmable with front panel LCD and keypad
  • Supports VT100 terminal configuration and remote configuration using control port
  • Easy to use front panel keypad or EIA-232 control port for unit configuration and monitoring
  • Remote TSU LT configuration via FDL or 8k in-band
  • Local and remote loopback capability
  • Extensive built in test capabilities
  • Network T1 Test Access jacks
  • Support for T-Watch PRO software for optional PC based configuration
  • IEC standard power connection
  • DTE Transmit Clock: Automatic
  • Reports: NI information stored for last 24 hours in 15 minute increments
  • PRMS: ANSI Performance Report Messages (User selectable)
  • Framing:
    - SF/ESF
    - Auto Detection
  • ESF Format:
    - AT&T 54016
    - ANSI T1.403
  • DSO Assignment:
    - Contiguous
    - Alternating
  • T1 Transmit Timing:
    - Network Loop Timed
    - Internal
    - DTE
  • Performance Monitor Performance Data:
    - BPVs/CRCs
    - ES
    - SES
    - UAS
    - % AS
    - % EFSEC
    - Alarms
    - Errors
  • Built-In Test Patterns:
    - 511 (active DS0s) with error insert available
    - 1:8 (all DS0s)
    - All 1's (all DS0s)
    - All 0's (all DS0s)
  • Certifications & Standards

  • FCC part 15
  • Class A
  • FCC Part 68
  • Industry Canada CS03
  • UL
  • CUL
  • Physical Characteristics

  • Dimensions: 1.50" Height x 9" Width x 6.25" Depth
  • Shipping Dimensions: 6.50" Height x 8.50" Width x 11.25" Depth
  • Shipping Weight: 3.08 lb
  • Weight: 2 lb
  • Form Factor: Rack-mountable
  • Power Description

  • Input Voltage: 115 V AC
  • Frequency: 60 Hz
  • Power Consumption: 5 W Operating
  • Management & Protocols

    Technical Information

  • Data Encoding: AMI/B8ZS
  • Diagnostic Features: Tests:
  • Local:
    - Payload/Line Loopback
    - DTE Loopback
  • Remote:
    - Payload/Line Loopback
    - V.54 (DTE) Loopback
  • Network: CSU and DSU loopbacks
  • Test Access jacks for Network T1
  • Operating Mode: Point-to-Point
  • Warranty

  • Standard Warranty: 5 Year Limited - North America